Suzuki boat engine DF 300A
Description
The new Suzuki DF300AP outboard motor is rapidly gaining a leading position in the watercraft market. It has already been awarded a special prize for innovation by the National Association of Marine Engine Manufacturers. The DF300AP model is equipped with a new sensor with an advanced system for determining the oxygen content in exhaust gases, a lean mixture control system (Suzuki Lean Burn System) and a fuel filter with a water detection sensor. It is worth noting the presence of the Suzuki Precision System, which makes it possible to use the motor without remote control cables due to the use of an electric cable and special actuators. As a result of using this system, it has become even easier to install two control posts and several motors on the transom. Already the first tests show that the updated DF300AP is 15% more economical than the previous DF300 model. Also, the company’s engineers have significantly transformed the gearbox of the new DF300AP motor, which can operate in normal mode, both in the right and left rotation of the propeller. Now, when installing a second motor of equal power on the boat hull, you do not need to select a motor with counter-rotation – just switch one of the motors to the reverse rotation mode and install the corresponding (suitable) propeller. The pinnacle of engineering, with outstanding characteristics, powerful and reliable – it will become your faithful friend during exciting trips on the water.
Motor package
– operating instructions;
– fastening bolts, washers, nuts;
– tools;
– multifunctional device MFG (Multi Function Gauge);
– steel propeller.
Remote control kit is purchased separately!
| MODEL | DF300AP *3 |
|---|---|
| RECOMMENDED TRANSOM HEIGHT mm | X:635, XX:762 |
| STARTING SYSTEM | Electric |
| WEIGHT kg *1 | X: 290, XX: 299 |
| ENGINE TYPE | DOHC 24-Valve |
| FUEL DELIVERY SYSTEM | Multi-Point Sequential Electronic Fuel Injection |
| NO. OF CYLINDERS | V6 (55-degree) |
| PISTON DISPLACEMENT cm3 | 4,028 |
| BORE ×STROKE mm | 98 x 89 |
| MAXIMUM OUTPUT kW | 220.7 |
| FULL THROTTLE OPERATING RANGE rpm | 5,700-6,300 |
| STEERING | Remote |
| OIL PAN CAPACITY Lit. | 8.0 |
| IGNITION SYSTEM | Fully-transistorized |
| ALTERNATOR | 12V 54A |
| ENGINE MOUNTING | Shear Mount |
| TRIM METHOD | Power Trim and Tilt |
| GEAR RATIO | 2.08:1 |
| GEAR SHIFT | F-N-R (Drive-by-wire) |
| EXHAUST | Through Prop Hub Exhaust |
| PROPELLER SELECTION (Pitch)*2 All propellers are the 3-blade type |
15″-27.5″ |
| Engine brand |
Suzuki |
|---|
Delivery time is 2-5 working days. The goods are delivered via Omniva - parcel machines, or Omniva courier. The delivery method is selected when placing an order. In case of ordering goods with non-standard dimensions (for example: boat motor, caterpillar, etc.) or large weight (battery), there is no possibility of sending via parcel machines. However, there is a possibility of choosing to receive when placing an order, delivery by Omniva courier.
METHODS OF SHIPPING GOODS
- Delivers the goods to the Omniva parcel terminal – 4.39 EUR
- Omniva courier delivers the goods to the address you specified – 8.99 EUR
Shipment outside Estonia
Delivery time outside Estonia is from 5 working days to 2 weeks, depending on the country.



